Lamborghini Huracan VF800 Supercharger - VF Engineering - Crown Auto Performance


Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: VFK89-01
Notes: Boost Pressure 7.5 psi Water Cooled Charge Cooler High efficiency supercharger Reduced parasitic engine load Optimal compatibly with stock transmission Durable powder coat finish Technical support 2 year parts warranty Parts list: • Eaton TVS2300 roots supercharger • 6061-T6 Aluminum intake manifold • Internal bypass system • High flow dual throttle body inlet • Dual air to water charge cooler system • Polypropylene water reservoir • OEM high density water radiator • Bosch water pump • Precision machined base plate • Hard anodized aluminum bracket • 7 rib OEM serpentine belt • OEM tensioner FEAD • High flow MAF housings • 2x K&N induction filters with pre-filters • HEX Flash Cable & ECU flash • Detailed installation manual
MSRP: $32,995.00
Your Price: $29,995.00

All Fitments

LAMBORGHINI
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
2015 - 2018 HURACAN ALL ALL ALL ALL ALL ALL

Product Description

The VF800 system is a genuine bolt-on supercharger kit containing everything necessary to produce sizable gains to both the HP and torque of the Huracan’s V10 engine. Available for 2014+ models worldwide, this system uses the latest generation Eaton TVS2300 3-lobe “Twin Vortices Series” roots supercharger with an air/water after cooling system. Using state of the art technology and production techniques, VF-Engineering has created a system that effectively integrates with the High Output 5.2-liter powerplant to produce proven OEM quality results

LP 580-2: 572hp | 398tq
LP 610-4: 602hp | 413tq
VF800: 805hp | 610tq

Packing a lag-free instant punch of torque from 2300 rpm, the air charge progressively climbs to redline for an exhilarating increase in forward thrust. The supercharger creates a predictable, linear powerband making it a competitor with the V12 Aventador. Designed as a reversible upgrade, this system is designed as a daily driver or competitive hypercar. Engine calibration is performed via electronic flashing of the factory’s dual Bosch ECUs with optimized code engineered, 4WD dyno, and road tested by VF/Hex Tuning.

Maintain Drive Modes.

No Supporting Modifications.

Factory Maintenance Schedule.

Our first V10 Supercharger System was completed in 2010 for SEMA. It is a purposely built bolt on system to a factory car with no supporting modification. VF-Engineering, Inc. uses state of the art processes to design, manufacture and evaluate the finest supercharger kits in the world. The VF-Engineering facility is located in the heart of Southern California with an R&D department equipped with CAD/CAM and CMM machines, laser scanning and 3D modeling and rapid prototyping. The VF electrical and software engineering lab is equipped with an array of resources including an in-ground Mustang MD500 AWD Chassis dyno. All our products are created and tested in house to ensure optimal gains and factory like drive-ability and reliability. VF-Engineering products are and always will be proudly Made in the USA.
DESIGN

VF-Engineering, Inc. uses state of the art processes to design, manufacture and evaluate the finest supercharger kits in the world. The VF-Engineering facility is located in the heart of Southern California with an RD department equipped with CAD/CAM and CMM machines, laser scanning and 3D modeling and rapid prototyping. The VF electrical and software engineering lab is equipped with an array of resources including an in-ground Mustang MD500 AWD Chassis dyno. All our products are created and tested in house to ensure optimal gains and factory like drive-ability and reliability. VF-Engineering products are and always will be proudly Made in the USA.

Boost Pressure 7.5 psi
Water Cooled Charge Cooler
High efficiency supercharger
Reduced parasitic engine load
Optimal compatibly with stock transmission
Durable powder coat finish
Technical support
2 year parts warranty

As with any many intricate hardware development projects, you often run into situations where you may need to design a component entirely from scratch. This happened throughout the development cycle for our V10 Supercharger system as no similar product existed other than our previous iteration on our Audi R8 V8. The following components are just a small collection of items conceptualized, engineered, and manufactured exclusively for this project

Idler Pulley Assembly:

As the Supercharger unit itself is driven by the factory crank pulley, it was necessary to develop a unique idler pulley and bracket system to turn the supercharger. The Idler Pulley Assembly shown below is 100% unique, employs it’s own belt; and as no other V10 Supercharger system existed at the time, had to be developed 100% from scratch by our engineers.

Designed as a reversible upgrade, this system is designed as a daily driver or competitive hypercar. Engine calibration is performed via electronic flashing of the factory’s dual Bosch ECUs with optimized code engineered, 4WD dyno, and road tested by VF/Hex Tuning.

Pancake Pipe:

Developed to provide optimal flow for fluid transfer and the necessary clearance between the engine block and VF Engineering pulley bracket.

Alternator Retaining Nuts:

Designed and manufactured by VF Engineering to allow adequate room for tool clearance, as a standard hex nut and socket would not fit within the same area.

Parts list:

• Eaton TVS2300 roots supercharger

• 6061-T6 Aluminum intake manifold

• Internal bypass system

• High flow dual throttle body inlet

• Dual air to water charge cooler system

• Polypropylene water reservoir

• OEM high density water radiator

• Bosch water pump

• Precision machined base plate

• Hard anodized aluminum bracket

• 7 rib OEM serpentine belt

• OEM tensioner FEAD

• High flow MAF housings

• 2x K&N induction filters with pre-filters

• HEX Flash Cable & ECU flash

• Detailed installation manual

Crown Auto Performance is an Authorized Dealer / Distributor for VF Engineering Superchargers Worldwide.

Product Reviews

Be the first to review this item.

Rating
Title
Review